7 BEST Material for Plant Pots | Industrial Expert Guide

Author: Janey

May. 06, 2024

7 BEST Material for Plant Pots | Industrial Expert Guide

After many hours of thinking, researching, and searching for that perfect plant to perk up your interior, or to add a little life to your exterior, now you think, what about the container? What options are there? Well, the most important consideration revolves around planter materials.

For more information, please visit metal planters wholesale.

Choosing the right material will make a big difference to the health of your plants and will also ADD to the visual appeal of your interior or exterior. The most common types of planters are:

  • Concrete planters
  • Fiberglass planters
  • Terracotta planters
  • Ceramic planters
  • Plastic planters
  • Foam planters

Planters that use natural materials are less common but also have their pros, such as wood and metal planters. Here is a quick comparison of different plant pot materials for you before we deep dive into it.

©Jay Scotts

1. Fiberglass Planters

Although fiberglass is a relatively new and modern material, it is preferred by almost all developers and landscapers. To make it, glass is spun into a fiber and then mixed with a resin to create a very strong and flexible composite.

This fiberglass and resin mixture is then put into a mold to create various shapes and sizes. A few rounds of sanding and a layer of primer give the fiberglass planter a flawless and protective finish. Drainage holes can be drilled into the bottom to allow adequate drainage.

Advantages

Durability – Fiberglass containers are extremely strong and flexible. They can be utilized both indoors and outdoors and can take quite a beating. Plus, any little scratches and wear-and-tear can be buffed out or painted over really easily.

Quality – Despite the low cost, Jay Scott’s attention to detail and high manufacturing standards create fiberglass pots with superior quality in regards to their strength and finish. Fiberglass pots are also really lightweight so they are an ideal material for large containers.

Plant health – Fiberglass is a material known for its plant-protection qualities. The health benefits of buying fiberglass include UV protection for hot climates and waterproofing, and because it’s not a porous material, it won’t leech chemicals into the soil and harm your plants, perfect for growing edibles!

Disadvantages

Cost – Fiberglass pots are relatively cheap to produce compared to heavier materials such as wood and metal, but it is more expensive than plastic and terracotta. If you want a planter that stays as good as new for longer and is healthier for your plants, pay a little extra and buy fiberglass.

Manufacturer dependent – Some manufacturers cut corners when they produce this material. The way they do this is by adding more resin and fillers that don’t have any structural benefit but do add to the weight. So watch out for heavy fiberglass planters, this is a sign of an inferior product.

2. Concrete Planters

Manufacturing concrete for any purpose consists of mixing cement paste with water, sand, and rock to create the final product.

In industrial concrete production, a combination of chemicals such as calcium, silicon, aluminum, and iron are used to help bind and harden the mixture.

Wet concrete is poured into the desired shape using a mold. When left unpainted, concrete is a light gray color. However, they can be jazzed up in any color you like using masonry paint.

Small indoor concrete planters ©Freddie Marriage / Unsplash 

Advantages

Color – Concrete planters can be aesthetically neutral in a busy color scheme due to their natural light-gray color. They can also be painted easily at home with a variety of paints, though masonry paint is the best. This leads to endless DIY and customization fun.

Weight – Concrete is quite heavy and hardy. This makes it ideal as an outdoor planter for large plants where strong winds and weathering would otherwise do some destruction (not ideal for indoor use or if you want to rearrange your planters often).

Shapes and sizes – Due to the nature of the molding process, concrete containers can come in any shape and some very large sizes. It also means that manufacturers can offer bespoke designs for custom orders.

Disadvantages

Environment – Concrete is environmentally damaging to produce along the supply chain. For example, manufacturing cement produces a lot of C02 which contributes to global warming.

Fragile – Though concrete is strong, it is also brittle. A few hard knocks during delivery and you need to order replacements. Remember to cover or move outdoor planters during winter so that water doesn’t pool in them and then freeze. Over time this can crack the concrete.

Plant health – Concrete contains lime which can leech into the potting soil. This creates an alkaline Ph balance that is great for succulents, but for many other plants, it can stunt growth. In addition, concrete is porous so pots can lose moisture quickly.

Fiberglass planters vs. Concrete planters

When talking about long-time durability and strong up-front investment, it really only comes down to fiberglass and concrete.

Both of these planter types have long lifespans as well as are incredibly durable, but concrete planters cannot be moved without running the risk of structural damage to the surrounding property. On the other hand, our larger fiberglass can still be easily moved even when they’re filled with soil and plants.

Jay Scotts’ Globe planters put the finishing touch to every space. ©Jay Scotts

Concrete planters will be coarser to the touch than fiberglass planters. While they are both capable of being painted in a wide variety of colors, concrete planters will always have a slightly muted tone to them due to the material.

The overall quality of fiberglass planters makes them a more worthy option. With fiberglass, you’re receiving easier maneuverability with brighter colors for the same long lifespan.

3. Plastic Planters

Plastic is the wonder material that first entered the world stage in 1907. Since then, all kinds of containers have been manufactured using plastic.

Plastic pots are made from crude oil which is a non-renewable resource. Nevertheless, huge industries exist to extract and then process the oil needed to create plastic containers.

Nowadays, there are many different kinds of plastic for a range of purposes, such as uPVC which is considered safe to use for growing food.

Advantages

Cheap – Plastic is possibly the most mass-produced material in human history. It is extremely cheap to make and mold into any shape or style. The standard supermarket plant pot is plastic.

Light – One reason why plastic is so popular the world over is that its strength-to-weight ratio is very high. Plastic pots can be very thin, shipped across the world, dropped a few times, and still do the job.

Disadvantages

Environment – Plastic has many harmful effects on the environment. Just one example is that plastic is so durable that it takes thousands of years to degrade. During this time, toxins from the plastic container can leech into the groundwater, enter the food chain, and cause harm to whole ecosystems.

Plant health – As mentioned above, plastic releases chemicals that are organically harmful. This is why it is important to choose the right kind of plastic. If you want to grow vegetables. look for planters made with uPVC to minimize the number of chemicals that get sucked up by your poor plants.

Single-use – Though touted as durable, plastic can become very brittle and crack when exposed to sun and heat for extended periods. A plastic pot may only last one season before a crack renders it useless.

Fiberglass planters vs. Plastic planters

In appearance, both materials can represent a wide range of colors but unfortunately, plastic is a very cheap substance and it will look cheap too.

When it comes to implementing color, producers of plastic planters often melt the plastic with the color or dye the plastic and then add the color. This can make for some bright colors, but it lessens the overall quality of the color. With our painted fiberglass, we use the same paint that gives contemporary automobiles their sleek appearance and amazing reflections if the gloss is used.

Both planters won’t negatively impact plant health. However, plastic planters are more easily eroded. Fiberglass is superior at maintaining and regulating temperatures, whereas plastic can morph in high heat and crack in the cold.

On the whole, fiberglass is much more durable than plastic. It can hold its shape better while also maintaining its structural integrity for a much longer time.

Fiberglass plant pots are the perfect addition to your home, whether indoors or outdoors

4. Terracotta and Ceramic Planters

Ceramic and terracotta are essentially just slight variations on the same material, clay. Terracotta is the name of the particular type of clay used, and it does have different properties.

For example, it is iconically reddish-brown in color and sports a rustic look, whereas ceramic is a light-colored clay. Ceramic is often glazed on the outside while terracotta is not.

Use glazed ceramic pots to keep your plants hydrated as the glazing seals the pot and stops leakage. On the other hand, unglazed terracotta looks great and is well-suited for plants that like a lot of drainage.

Beautiful flowers in ceramic planters ©Gemma Evans / Unsplash 

Advantages

Cost – Clay pots of either kind can range from very cheap and cheerful to outlandishly expensive and luxurious. This material creates inexpensive containers that can be reused time after time, saving more money.

Durable – Ceramic planters that are glazed are extremely durable and can last decades of direct sun and cold climates. Both terracotta and ceramic pots can be reused safely

Appearance – Terracotta is usually left unglazed on the outside. The outside will flake and age over time with further baking and weathering. This gives it a natural look and is visually appealing both in the garden and inside.

Disadvantages

Weight- Terracotta and ceramic planters are quite heavy so are not the best planters to move around constantly. If you have large plant pots it becomes impossible to arrange them easily. This is not the greatest material for pots that need to come inside during the winter.

Brittle – Plant containers made of clay are prone to cracking if dropped and need a rather careful delivery, especially for really large containers. The porous nature of clay is also something to worry about during winters when freezing and thawing can produce fissures and over time cracks and chips.

Fiberglass planters vs. Terracotta planters

The biggest difference between terracotta and fiberglass planters is their customizability. Fiberglass has much more room for customizability regarding colors, and it is being adopted much more into modern interior design.

Terracotta has to be changed at a molecular level to alter the color while fiberglass planters can be repainted. Fiberglass planters are also much lighter than terracotta planters, which makes it much easier to move them around. Terracotta pots often have a very weighty feel to them too.

Both of these materials bring a unique appearance, and for many people’s small gardens at home, terracotta pots and planters are frequent fillers due to their rustic appeal. Both the planter materials offer great support and breathing room for plants to grow and root, but terracotta planters are also prone to cracking in cold weather and retain excess heat which can damage the plant root.

5. Metal Planters

There are various kinds of metal containers on the market, but the most common materials used are steel, aluminum, zinc, and copper. As an outdoor planter, metal containers, especially steel, will rust over the years to become red in hue. This process is quickened by the outside elements. Metal materials are not porous so to ensure good drainage, drill holes in the bottom to allow water to leave and create good airflow.

Growing mint leaves in mental pots ©Misael Chavez / Unsplash 

Advantages

Strength – Metal containers are extremely strong and durable. They won’t chip, crack, or scratch, and can be left outside to age with no problems. Galvanized steel is even stronger and will be more weather-resistant compared to other planters in your container garden.

Appearance – Metal containers are a great addition to any decor, especially as they are available in a wide range of metals that can be used. Choose the right metal for your style. Galvanized steel, aluminum, and zinc have the industrial look that many interior designers chase. Copper and rusted steel on the other hand are very rustic and fit in well with a farm-kitchen decor.

Disadvantages

Weight- Metal containers can be quite heavy in large sizes and are not ideal to move around very often. The benefit is that they won’t be blown around or knocked over very easily. This makes them a great choice for large corporate settings where a strong industrial look is sought after.

Overheating – When left in direct sunlight, metal containers can get very hot and damage the roots of your plants. For this reason, it’s best to keep metal planters in the shade or bring the planters inside on a hot day.

Fiberglass planters vs. Metal planters

While fiberglass is interwoven fibers that are layered atop each other, metal planters often have either a dull or bright shine to them due to the sun. They are both lightweight and easy to maneuver, but when it comes to plant health, fiberglass takes the cake.

Metal planters are too risky for outside and inside plant health. On the outside, excess heat can burn and damage the soil and the plants. Inside, the metal can rust and cause oxidation to occur at the bottom of the plants, rusting them too.

Metal planters are highly prone to rust which can also degrade the integrity of the pot and cause holes. Considering the importance of watering plants, it is incredibly common for metal planters to start showing damage signs. Fiberglass planters, on the other hand, do not have any risk of rusting due to the lack of iron in the planter composition.

Our fiberglass planters are used in the restaurant setting to frame the outdoor space. ©Jay Scotts

6. Wood Planters

Wooded containers are made with a variety of different natural materials. The most common varieties are rosewood, cedar, hemlock, fir, and pine.

Other materials such as bamboo pots are extremely lightweight. Planks and beams are cut from these trees to make lumber. This is then cured and treated for several months to increase the waterproofing and strength of the pot.

Cactus in wood planters ©Raychan / Unsplash 

Advantages

Natural material – Wooden pots are made from natural materials and don’t pose a threat to plant health. However, you do need to give them extra attention to make sure there is no rot. This involves applying a coat of polyurethane, varnish, or lacquer to seal the wood from moisture and weathering, and it looks great too.

Appearance – One feature of wood is how natural and humble wooden pots look as an outdoor planter, and how they are very ornamental when used indoors. Bamboo planters are ideal hanging baskets for their visual appeal. Wooden plant pots come in a wide range of styles that don’t work with other planter materials. For example, a hollowed-out tree trunk looks rustic in wood but tacky in plastic.

Disadvantages

Life span – The average wooden planter will last around 10 – 20 years with a bit of love and the occasional maintenance. This sounds like a long time but compared to fiberglass, which lasts forever, wooden planters are slightly on the short life span side.

Cost – Planters made from wood are a lot more expensive than mass-produced plastic pots for example. The most expensive woods are cedar and rosewood, though these are the most beautiful and are waterproof too.

Fiberglass planters vs. Wooden planters

While each has its unique appearance, wooden planters and pots have a much more specific aesthetic than fiberglass planters. If you are going for a rustic or vintage look, then wood might be the superior planter for you, but it also comes with limitations.

Fiberglass is better at handling varying climates. If wood is properly sealed and varnished it will be okay for the variances, but humidity will break down a wooden planter faster than a fiberglass one. In an office setting the degradation will be slower, but the wood will go before the fiberglass does.

Fiberglass is also much more customizable than wood. The variety of painting solutions and styles we provide can make them virtually indistinguishable from all the other materials out there, except for wood. Wood is best at looking like itself though you can hide the fact by using different paints or styled cuts.

But ultimately, it won’t look better than an alternative, and it would often cost much more to make it look like its cheaper counterpart.

©Jay Scotts

7. Foam Planters

Foam planters are made from plastic chemicals such as Polyurethane and Polyethylene and can come in several different grades ranging from thin to thick. Polyurethane has more insulation than other foam materials and is ok to be left outside over summer and winter – but just ok.

Both foam materials produce a pot that visually looks a little like terracotta and can be manufactured into a little run of shapes, sizes, and textures. The biggest highlight of foam is the impressive strength-to-weight ratio that it holds, though, with cheap foam containers, there is no strength as well as no weight.

Advantages

Weight – Foam is one of the lightest materials on the market. A foam container is perfect for transporting your plants around if ever you move house!

Price – Foam planters are quite cheap so often they are the plant pot that the nursery gives you before you find something better.

Disadvantages

Durability – Foam planters are not meant for long-term use and even the best products typically won’t last more than 2 winters.

Environment impact – Though the overall structure will stay intact for a few years, foam is prone to chipping and shedding all over the place which essentially amounts to the spread of plastic pollution.

Fiberglass planters vs. Foam planters

Fiberglass and foam planters might be the furthest apart in terms of their structural integrity, quality, and price.

For more wholesale outdoor stone picnic tableinformation, please contact us. We will provide professional answers.

While there have been great advances in the visual appeal of foam planters, there is still a large disparity regarding customizable choices between fiberglass and the limited foam opponent.

Fiberglass is far more durable than foam but naturally, if not handled properly and with care, both can suffer cosmetic damage impacting the visible integrity of the containers.

Temperature control is a bit of a wash. In colder climates, both of these planter materials operate effectively at keeping the plant healthy. However, at higher temperatures, the foam can degrade and release chemicals that are harmful to the plant’s health.

The only positive to working with foam planters is the fact that they are cheaper than fiberglass. Unfortunately, they are cheaper in more ways than one.

©Williamsburg / Jay Scotts

The best material for outdoor planters

The best material for outdoor planters is fiberglass regardless of the application. With high performance and low environmental impact, fiberglass planters outperform cheaper and more expensive options.

To grow plants such as flowers in a cheap plastic container is OK, but for plant displays for beauty and elegance, or for growing edibles, fiberglass planters are much more impactful, and safer health-wise!

Though some may be worried about the weight, fiberglass is much stronger than plastic and is just as light.

Before choosing an outdoor planter material, think about the style that you want to follow, and what materials allow you to achieve this style. Again, fiberglass planter designs are extremely versatile and can be produced in any size and shape. Plus, the range of colors that fiberglass supports is virtually endless!

Also, decide if you will be moving these pots inside during the winter. Concrete and metal are too heavy and wood will fall apart with too much back and forth. Plastic and foam are also an option because they are light, but they may also crack too easily.

Again, fiberglass is ideal because it can withstand all the elements of the great outdoors, and it is strong and light enough to move inside when necessary.

The best material for indoor plant pots

Fiberglass indoor plant pots offer numerous advantages over traditional materials like ceramic or clay. Their lightweight construction makes them easier to move and handle, while still providing the durability needed to withstand the demands of indoor environments.

Additionally, fiberglass pots come in a wide range of shapes, sizes, and finishes, allowing for endless customization options to suit any interior design scheme.

Besides fiberglass, terracotta pots are also a good choice for indoor use. They have that classic, earthy vibe that just screams cozy. They’re great for indoor plants because they’re porous, so they let the soil breathe and prevent overwatering. Plus, they’re affordable and come in tons of sizes and shapes, perfect for any plant parent’s style.

See Jay Scotts Planters In Action!

Check out our project for Pura Vida, a health and decor-conscious restaurant in Miami, Florida that
came to us with a challenge: create a private patio area that draws in diners while offering peace and
tranquillity once inside. Take a look at our solution!

Pura Vida Las Olas, Miami

Creating a commercial space like this is challenging for clients as their customers often want privacy from the street while also having both an open and refreshing experience once inside. Our planters were the perfect solution!

Read more

View Project

Our Favorite – Fiberglass Planters

Fiberglass is our favorite material, not only because the environmental impact of fiberglass is low, but also because our gardens and homes look great with it. On the downside, fiberglass pots are pricier than throwaway plastic ones, but consider the initial cost as an investment in a pot that will have years of use.

In addition, fiberglass is the easiest pot to arrange because it is lightweight and it won’t break. This makes fiberglass the best choice when you are container gardening and you want to clean, move, and tend to your pots often.

Material is just one advantage that makes fiberglass pots perfect for your next planter – there are many more.

To find out more trade secrets behind why fiberglass planters are so special, see our buyer’s guide to fiberglass plant pots.

Frequently Asked Questions

Yes, ceramic pots are suitable for plants as they provide good insulation for roots and come in various styles, but they can be heavier and prone to breakage compared to fiberglass.

Plants can thrive in clay pots as they allow for better airflow and drainage, but they may require more frequent watering due to the porous nature of clay.

Pots with sufficient drainage and breathable materials like fiberglass or clay promote healthy root growth by preventing waterlogging and allowing oxygen to reach the roots.

While larger pots offer more space for root expansion and can support larger plants, growth rate depends more on factors like proper watering, nutrition, and environmental conditions rather than pot size alone. Read more about Are Big Pots Better?

The best planter to avoid root rot is one that provides excellent drainage. Opt for pots with drainage holes at the bottom, or use a pot with a reservoir or self-watering system that prevents water from pooling around the roots.

Additionally, choosing a lightweight and breathable material like fiberglass can help prevent waterlogging and promote healthy root aeration.

Advantages of Using Metal Garden Planters

Advantages of Using Metal Garden Planters

Golddust Gardening

·

Follow

5 min read

·

May 26, 2023

--

You do the right thing When you add plants in your space. plants beautify your place and bring positivity and good air quality. but wait a minute, what type of planters do you have for your plants? Well, you should go for metal garden planters as they do offer you numerous advantages. These sturdy and chic containers have turned out to be increasingly popular in recent years. Whether you have a huge sized backyard garden or a tiny balcony space, metal planters can boost the gorgeousness of your plants at the same time providing several practical advantages. Have a look at some of the advantages of owning these metal planters:

Great Durability

Metal planters are famous for their durability. They can endure harsh weather conditions, including heavy rain, strong winds, and extreme temperatures. Unlike plastic or wooden planters that can deteriorate over time, metal planters are constructed to last, making them a long-term type of investment for your garden. Of course, you can be sure that your planters survive all sorts of harsh conditions and still stay intact and charming. Hence, when you get durability in your planter, you get satisfaction too. What is the point if you buy a random material planter and it gives up in a week?

Incredible Versatility

Metal garden type of planters come in a variety of sizes, even shapes, and designs, permitting you to find the perfect fit for your garden or even outdoor space. From sleek modern designs to even intricate vintage patterns, there is a metal planter to suit any chic or aesthetic preference. You can be sure that you have the planters that go well with your space and the vibe you have. Your space is going to look incredible with the versatility of these planters. Whether your home or office, you can count on them. come on, the versatility of your planters makes you feel confident about having them for any and every space.

Impressive Strength

Metal planters are robust and sturdy, providing excellent support for plants and roots. This strength ensures that your planter won’t easily tip over or even get damaged, even when filled with heavy soil or even huge plants. Hence, you can be sure that you have strength in your pots. The strength of your planters will help you feel confident about their existence and tolerance power.

Amazing Aesthetics

Metal planters add a pinch of elegance and sophistication to any sort of garden or outdoor area. Their sleek and polished look complements both contemporary and even traditional settings, enhancing the overall visual appeal of your plants as well as flowers. You can be sure that you have perfect aesthetics for your place. after all, what is the point if the plants are wonderful but the planters in which you have placed them are not at all pleasing or aesthetically impressive?

Rust Resistance

It is also critical for you to know that most metal planters are treated with protective coatings to avert rusting. This feature promises that your planters maintain their appearance and even structural integrity, even when exposed to moisture or even humidity. This way, you can be sure that your planters do not fall victim to any sort of rust. What is the point if you have a beautiful planter but it gets rusted in some months only? So, opt for metal, and you won’t experience that.

Colour Options

Metal planters are there in various colours and finishes, enabling you to customize your garden’s look. Whether you prefer a classic metallic silver or even a bold and vibrant hue, you can get a metal planter that matches well your desired colour scheme. Come on; you can get the colours that are ideal for your space and get you the vibe you want to create. The colour options are definitely going to blow your mind.

Pest Resistance

Ah, contrary to wooden planters, metal planters are not vulnerable to pests such as termites or even wood-boring insects. This advantage removes the need for chemical treatments and reduces the danger of damage to your plants. Come on, when you have plants at home, you want to ensure pest resistance.

Fire Resistance

It is also significant to know that metal is a non-combustible material, making metal planters a safe preference for fire-prone areas. Whether you live in a dry climate or even just want to minimize fire hazards, metal planters provide you with an added layer of safety.

Maintain ace would not trouble you

Metal planters are low-maintenance and even easy for you to clean. Unlike porous materials like terracotta or even wood, metal does not really absorb dirt or stains. Wipe down the surface with a damp cloth, and your planters are going to look as good as new. Hence, you can be sure that your planters always have that charm and a brand-new look.

Temperature Regulation

Metal planters have brilliant thermal properties that can advantage the root systems of your plants. They help regulate the soil temperature, keeping it cooler in humid and hot weather and warmer in colder climates. Hence, you don’t have to worry about the temperature thing.

Water Retention

Metal planters often come with proper drainage holes, permitting the access water to escape. However, they still retain sufficient moisture to keep your plants hydrated. In addition, the metal material helps prevent extensive or excessive evaporation, promising that your plants receive the right sum of water.

Protection against Wildlife

Metal planters offer protection against animals and wildlife that may try to dig or nibble at your plants. The sturdy construction and even hard surface make it challenging for small critters to harm your garden.

Great Longevity

Because of their impressive durability , you can be sure that your metal planters have a longer lifespan than other materials. Investing in a suitable quality metal planter means you don’t have to buy a new one for years or even longer. All thanks go to their strength and durability!

Conclusion

To sum up, you should check out the variety there for you. Just buy the best metal planters online in India and enhance your space with the plants you love.

The company is the world’s best tree grate price supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

9

0

Comments

Please Join Us to post.

0/2000

All Comments ( 0 )

Previous: None

Next: None

Guest Posts

If you are interested in sending in a Guest Blogger Submission,welcome to write for us!

Your Name: (required)

Your Email: (required)

Subject:

Your Message: (required)