How Does Industrial Sewing Machine Work?

DENICE supply professional and honest service.

How Does Industrial Sewing Machine Work?

Industrial sewing machines are an essential part of the manufacturing process for a variety of products, such as clothing, bags, and upholstery. They can be used to create intricate patterns and designs, as well as to quickly sew together larger pieces of fabric. Here’s a step-by-step guide to how they work.

Step 1: Thread the machine.

Before you can start sewing, you’ll need to thread the machine. This involves running the thread through the machine’s various components, such as the needle and the tension disks. The needle is usually threaded from front to back, and the thread is guided through a series of loops and hooks. Be sure to consult the machine’s manual for specific instructions, as the threading process can vary depending on the machine’s make and model.

Step 2: Load the bobbin.

The bobbin is a small spool that holds the lower thread and sits in the bobbin case beneath the needle plate. To load the bobbin, you’ll need to wind the thread around the spool, then place it in the bobbin case and thread it through a small hook. The bobbin case is usually located beneath the needle plate, and can be accessed by removing a small cover.

Step 3: Adjust the tension.

Once the machine is threaded and the bobbin is loaded, you’ll need to adjust the tension. The tension regulates the amount of thread that’s fed through the machine, and can be adjusted using a small dial or lever on the machine’s front panel. Be sure to test the tension by sewing a few stitches on a scrap piece of fabric before starting your project.

Step 4: Select the stitch.

Industrial sewing machines can create a variety of stitches, such as straight, zigzag, and decorative patterns. To select the stitch, you’ll need to adjust the machine’s settings using the controls on the front panel or the sewing foot pedal. The stitch length and width can usually be adjusted using small dials or levers.

Step 5: Start sewing.

Once you’ve threaded the machine, loaded the bobbin, adjusted the tension, and selected the stitch, you’re ready to start sewing. Place the fabric under the needle, with the edge lined up with the guide on the machine’s bed. Press the sewing foot pedal with your foot to start the machine, and guide the fabric through the machine using your hands. Be sure to keep your hands away from the needle and the moving parts of the machine.

Step 6: Finish the seam.

Once you’ve sewn the desired length, stop the machine by releasing your foot from the sewing foot pedal. Cut the thread, leaving a tail of several inches, and remove the fabric from the machine. Pull the fabric away from the needle, and raise the needle to its highest position using the machine’s controls. Tie the two threads together in a knot, and trim the tails close to the knot. Your seam is now complete!

In conclusion, industrial sewing machines are complex machines that require skill and practice to use effectively. By following these step-by-step instructions, you can learn the basics of how they work and begin to create your own high-quality products.

View Details

If you are looking for more details, kindly visit DC Series Power Cord Making Machine.